Cables

Our power supplies are equipped with the necessary interconnect cables to connect them to a Naim preamplifier or CD player. If you need additional cables (see use cases below) we can provide good quality cables at a reasonable price. These cables are a replacement for the Naim Snaic cables.

Our RCA type interconnects are made using WBT NextGen plugs, matching the WBT NextGen sockets used in our equipment. These connectors are considered among the best connectors available and usually used only in extremely expensive equipment and interconnects.

All cables are screened, made of silver plated PTFE insulated wires*, capacitance is around 13pF/ft, and resistance is also very low, around 10 milliohm/ft. Connectors are the same as the original Naim Snaic cables.

All cables are 1m length, please let us know if you need a different length.

* The NAC52/252 and SNAXO/SuperLine Burndys are made of individually screened twisted pairs of copper wires.

Examples where additional cables are required:

- In order to connect a Naim integrated amplifier such as the Nait or SuperNait an additional 4-pin cable is required.
- In order to connect a phono stage such as the StageLine a 4-pin to 5-pin cable is required.
- In order to connect a Headline to a Hi-Cap output of a TeddyCap a 2-pin to 5-pin cable is required.

Click on the cable image for details.

17 Item(s)

  1. 5-pin 240 degree DIN Cable
  2. DIN-XLR Audio Cable
  3. USB cable
  4. 4-pin DIN Cable
  5. 4 to 5 pin DIN Cable
  6. 5-pin 180 degree DIN Cable
  7. XPS Burndy Cable
  8. Snaxo/SuperLine Burndy Cable
  9. NAC52 Burndy Cable
  10. NAC252 Burndy Cable
  11. RCA-DIN 5-pin Audio Cable with WBT NextGen Connectors
  12. RCA-DIN 4-pin Audio Cable with WBT NextGen Connectors
  13. RCA-XLR Audio Cable with WBT NextGen Connectors
  14. RCA Audio Cable pair with WBT NextGen Connectors
  15. 75 Ohm Digital Cable with WBT NextGen Connectors
  16. 75 Ohm Digital Cable with BNC and WBT NextGen Connectors
  17. Power Supply Cable

17 Item(s)